without permission in writing from METREL. 2 : MI 3102H CL Table of contents 3 (except reading this instruction manual) to operate the instrument. In order for operator to be familiar enough with measurements in general and typical

storing in the distribution board. With the more advanced Metrel installation testers, structures can be built with the software and uploaded to the instrument for easy installation navigation while performing on-site testing. Additionally the EuroLink PRO Plus software offers the ability to automatically generate professional PRO Plus Reports. It not only prompts you through all the compulsory AS/NZS3017 electrical tests but also allows you to print out a report for the client as is now mandatory. by Leo Simpson Test and Tag Supplies Metrel InstalTest XC MI 3152 [MET0INXC] - Overview: The Metrel Instal test XC is a revolutionary new Installation tester from Metrel with advanced recording facilities. Multifunction Installation testers have been around for some time, but untli now, none have addressed the growing need for advanced recording facilities alllowing detailed data entry and recall of and measurements, Metrel recommends keeping your EasiPLUS instruments in good condition and undamaged.. When using the instrument, consider the following general warnings: The symbol on the instrument means »Read the Instruction manual with special care for safe operation«. The symbol requires an action! The Metrel MI3360 OmegaPAT XA PAT Tester offers lots of options for domestic and commercial PAT testing in addition to testing on three-phase appliances and even ARC welding equipment when used in conjunction with the correct adaptor. • PC Software Metrel ES Manager • Short instruction manual Standard set MI 3152 EU Instrument MI 5152 EurotestXC (set ST) • Current clamp A 1018 (low range, leakage) • Current clamp A 1019 • Licence for Advanced PC Software Metrel ES Manager Note! Photographs in this catalogue may slightly differ from th